
What We Do
We repair what can be repaired and install what cannot. That covers running toilets, weak or partial flushes, water pooling at the base, loose or broken seats, and tanks that sweat or refill on their own through the night.
For replacements, we remove the old toilet, inspect the flange and floor around it, replace the wax ring and supply line, and set the new bowl level and sealed. We install standard, comfort height, dual flush and one piece models, and we haul the old unit away so you are not left with it in the garage.
Common Toilet Problems
A toilet that keeps running is almost always a worn flapper or a fill valve that no longer shuts off. It is a small part with a large water bill behind it. Weak flushing usually points to a blocked rim jet or mineral build up in an older bowl.
Water at the base of the toilet is more serious. It can be a failed wax seal, a cracked bowl, or a loose closet bolt, and the damage it does to the subfloor is invisible until the floor feels soft. Rocking toilets and sewer smells in the bathroom are the same family of problem.
How It Works
Describe what the toilet is doing and we will usually know the likely cause before we arrive. Most repairs are completed in a single visit with parts on the truck.
If the toilet needs replacing, we confirm the rough in measurement, help you choose a model that fits the space, and give you the full price including removal and disposal before we start. Installations typically take under two hours.
Why Choose Plumingo
Toilets are the fixture you notice most when they go wrong, and the one homeowners most want fixed the same day. We keep common parts stocked and treat a leaking toilet as the urgent repair it is.
We are licensed, insured and clean. Floors and surrounds are protected, the work area is left tidy, and the finished job is tested with several full flushes before we leave. That is the standard across Kitchener, Waterloo, Cambridge and Guelph.
Toilets Questions We Get Asked
Why does my toilet keep running?
Usually a worn flapper or a fill valve that will not shut off. Both are quick, inexpensive repairs that stop the water waste immediately.
Can a leaking toilet be repaired or does it need replacing?
A leak at the base is often just a failed wax ring. If the bowl or flange is cracked, replacement is the safer and usually cheaper option.
How long does a toilet installation take?
Most installations are done in one to two hours, including removing and disposing of the old toilet.
Do you install comfort height or dual flush toilets?
Yes. We install standard, comfort height, dual flush and one piece toilets, and we can recommend one that fits your rough in measurement.